TN JT&S

OSHA 30 Construction
2018-06-04 12:00 - 2018-06-08 12:00 (America/Chicago)
The OSHA 30 Hour Construction Industry Outreach Training course is a comprehensive safety program designed for anyone involved in the construction industry. Specifically devised for safety directors, foremen, and field supervisors; the program provides complete information on OSHA compliance issues. OSHA recommends Outreach Training Programs as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Construction workers must receive additional training, when required by OSHA standards, on specific hazards of the job. Upon successful completion of the course, participants will receive an OSHA 30-Hour Construction Outreach DOL course completion card within 6-8 weeks.
The cost is $150.00 per employee for JT&S participants, $225.00 for non-participants. The course will begin at noon on the 4th and will finish by noon on the 8th to allow for drive time in and out of Murfreesboro. Classes on the 5th through 7th will be all day from 8:30 a.m. until approximately 4:00 p.m. The course will be presented by Brian Lewis, JT&S Instructor with the Public Works division. Brian is an authorized OSHA Outreach trainer and has twenty-five years of experience as a safety professional.

OSHA 10 ET&D
2018-05-15 08:00 - 2018-05-16 16:00 (America/Chicago)
This OSHA-accredited course provides an overview of OSHA construction safety regulations, with an emphasis on OSHA regulations for electric generation, transmission, and distribution equipment and systems (1910.269 and 1926 Subpart V). The OSHA 10-hour course is intended for line workers and supervisory employees. Students who complete this course receive an official OSHA card featuring the Partnership endorsement.
The cost is $50.00 per employee for JT&S participants, $75.00 for non-participants. The course will be begin at 8:30 and end by 4:00 both days. It presented by Mike Simmons, JT&S Coordinator.

Hotline School, Session 2
2018-05-09 13:00 - 2018-05-11 13:00 (America/Chicago)
This program is designed to meet the training requirements of OSHA for operator training of aerial devices and digger-derricks; and working on energized lines and equipment. Emphasis is placed on pre-operational inspection, proper set-up, capabilities and limitations of equipment. Participants are instructed in proper use of cover-up materials for personal protection. Field exercises include hands-on projects on simulated energized lines and structures common to electric distribution utilities. Various types of equipment are used for training of operators and lineman.

Hotline School, Session 1
2018-05-07 13:00 - 2018-05-09 12:00 (America/Chicago)

Advanced Transformer School, Session 2
2018-04-11 13:00 - 2018-04-13 13:00 (America/Chicago)
This program builds on the knowledge gained in the Basic Transformer School, which is a prerequisite for the program. Attendees of this program will receive instruction and hands-on training in advanced transformer theory, trouble shooting, and banking.

Advanced Transformer School, Session 1
2018-04-09 13:00 - 2018-04-11 12:00 (America/Chicago)

Basic Transformer School, Session 2
2018-02-21 13:00 - 2018-02-23 12:00 (America/Chicago)
This program is designed to introduce employees to the basics of transformers; single-phase, three-phase and pad-mount. Instructors cover the design and manufacturing process, basic electrical theory, basic theory of vectors, three-phase theory, transformer installation and basic trouble-shooting. The lab portion of the course provides hands-on instruction in building three-phase transformer banks.

Basic Transformer School, Session 1
2018-02-19 13:00 - 2018-02-21 12:00 (America/Chicago)

Foreman's Conference
2018-01-03 12:00 - 2018-01-05 12:00 UTC

OSHA 300 Log Recordkeeping
2017-12-12 08:00 - 12:00 UTC
This half day course will review recordkeeping requirements, maintenance of the OSHA 300 log, reporting & electronic scanning of the 300 log, 300A & 301.
To sign up for this class, fill out this form.

Supervisory Skills Modules 1 & 3
2017-12-11 12:00 - 2017-12-15 11:30 UTC

Substation School
2017-12-04 12:00 - 2017-12-08 11:30 UTC

Basic Transformer School
2017-11-06 12:00 - 2017-11-10 11:30, 2017-02-20 12:00 - 2017-02-24 12:00 UTC

OSHA 30 HR Construction Course
2017-10-30 08:00 - 2017-11-02 16:30 (America/Chicago)
The Tennessee Job Training & Safety Program is planning to present an OSHA 30 Hour Construction Course. The program will be conducted October 30 through November 2, 2017. It will be held at the Murfreesboro campus of the Tennessee College of Applied Technology Murfreesboro. This program requires 30 full hours of seat time and will be conducted over four full days. A minimum of three and a maximum of forty participants are allowed.
The course will be presented by Brian Lewis, Tennessee JT&S Instructor with the Public Works division. Brian is an authorized OSHA Outreach trainer and has twenty-five years of experience as a safety professional.
For enrollment, pricing, or more information regarding this and other training offered by the Tennessee Job Training & Safety Program, contact Michael M. Simmons, JT&S Coordinator at (423) 326-6376 or at msimmons@tcatmurfreesboro.edu.
Course Description
The OSHA Outreach Training Program provides training on the recognition, avoidance, abatement, and prevention of workplace hazards. Outreach classes also provide overview information regarding OSHA, including workers’ rights, employer responsibilities, and how to file a complaint.
Program Benefits

Promotes safety culture through peer training
Training is intended to be participatory, using hands-on activities
Trainers are able to tailor the training topics based on specific needs of their audience
Outreach training content includes hazard recognition and avoidance, workers’ rights, employer responsibilities, and how to file a complaint; it emphasizes the value of safety and health to workers, including young workers
Outreach training is available in languages other than English (Spanish, Polish, etc.)

10-hour and 30-hour Programs
The 30-hour training program is intended to provide workers with some safety responsibility a greater depth and variety of training. All outreach training is intended to cover an overview of the hazards a worker may encounter on a job site. Training emphasizes hazard identification, avoidance, control and prevention, not OSHA standards.

TOSHA Silica in Construction
2017-10-25 08:00 - 12:00 UTC
This half day course will review the silica in construction standard, Table 1, written exposure control plan, competent person, housekeeping & medical exams.
To register for this seminar, fill out this form.

TOSHA Basic Safety
2017-10-19 08:00 - 16:00 UTC
This full day course will review the most cited safety standards in general industry, walking working surfaces, emergency procedures, personal protective equipment (PPE), machine guarding, lock out/tag out (LOTO), & electrical.
To register for this seminar, fill out this form.

TOSHA Silica in General Industry
2017-10-18 08:00 - 12:00 UTC
This half day course will review the silica in general industry standard, exposure assessments, methods of compliance, medical surveillance & training.
To register for this seminar, fill out this form.

URD School
2017-10-16 12:00 - 2017-10-20 11:30 UTC

TOSHA Maintenance Related Standards
2017-10-12 08:00 - 16:00 UTC
This full day course will review the most cited standards in maintenance, lock out/tag out (LOTO), machine guarding, electrical, confined spaces, housekeeping, egress routes, emergency procedures, fire safety, compressed gas safety & health hazards.
To register for this seminar, fill out this form.

TOSHA Walking, Working Surfaces
2017-10-11 08:00 - 12:00 UTC
This half day course will review the changes to subparts D & I of 29 CFR 1910.
To register for this course, fill out this form.

Regulator/Recloser School
2017-08-14 12:00 - 2017-08-18 11:30 UTC

Line Clearance Tree Trimming School
2017-08-02 12:00 - 2017-08-04 11:30 UTC

Electrical Transmission & Distribution Course
2017-07-19 08:30 - 2017-07-20 17:00 UTC
This OSHA-accredited course provides an overview of OSHA construction safety regulations, with an emphasis on OSHA regulations for electric generation, transmission, and distribution equipment and systems (1910.269 and 1926 Subpart V). The OSHA 10-hour course is intended for line workers and supervisory employees. Persons attending this course will receive training in the following topics: Introduction to OSHA; Electrical Safety; Safe Grounding Practices; Personal Protective Equipment; Job Briefings; Confined and Enclosed Spaces; Lifting and Rigging; Excavations; and Fall Protection for the Electrical Industry. Each module is tailored specially toward the power transmission and distribution industry. Although this course is based on the current OSHA 1910 and 1926 standards, the course material discusses standards and industry accepted best practices along with such non-traditional subjects as equal-potential grounding, flame resistant clothing, electrical arc protection, and pre-job briefings. Students completing the ET&D 10-Hour course receive a traditional OSHA 10-Hour for Construction card with the ET&D endorsement.

2017 Tennessee Valley Lineman Rodeo
2017-06-09 - 2017-06-10

Hotline School
2017-05-08 12:00 - 2017-05-12 12:00 UTC

Advanced Transformer School
2017-04-17 12:00 - 2017-04-21 12:00 UTC

Underground Distribution Roundup
2017-01-25 17:30 - 2017-01-26 16:00 UTC

Work Zone Traffic Control Class
2016-12-15 08:00 - 16:00 UTC

Flagging Class
2016-12-14 12:00 - 16:00 UTC
