TN JT&S

Supervisory Skills Modules 1 & 3
2017-12-11 12:00 - 2017-12-15 11:30 UTC

Substation School
2017-12-04 12:00 - 2017-12-08 11:30 UTC

Basic Transformer School
2017-11-06 12:00 - 2017-11-10 11:30 UTC, 2017-02-20 12:00 - 2017-02-24 12:00 UTC, 2015-11-09 08:00 - 2015-11-13 12:00 (America/Chicago)

OSHA 30 HR Construction Course
2017-10-30 08:00 - 2017-11-02 16:30 (America/Chicago)
The Tennessee Job Training & Safety Program is planning to present an OSHA 30 Hour Construction Course. The program will be conducted October 30 through November 2, 2017. It will be held at the Murfreesboro campus of the Tennessee College of Applied Technology Murfreesboro. This program requires 30 full hours of seat time and will be conducted over four full days. A minimum of three and a maximum of forty participants are allowed.
The course will be presented by Brian Lewis, Tennessee JT&S Instructor with the Public Works division. Brian is an authorized OSHA Outreach trainer and has twenty-five years of experience as a safety professional.
For enrollment, pricing, or more information regarding this and other training offered by the Tennessee Job Training & Safety Program, contact Michael M. Simmons, JT&S Coordinator at (423) 326-6376 or at msimmons@tcatmurfreesboro.edu.
Course Description
The OSHA Outreach Training Program provides training on the recognition, avoidance, abatement, and prevention of workplace hazards. Outreach classes also provide overview information regarding OSHA, including workers’ rights, employer responsibilities, and how to file a complaint.
Program Benefits

Promotes safety culture through peer training
Training is intended to be participatory, using hands-on activities
Trainers are able to tailor the training topics based on specific needs of their audience
Outreach training content includes hazard recognition and avoidance, workers’ rights, employer responsibilities, and how to file a complaint; it emphasizes the value of safety and health to workers, including young workers
Outreach training is available in languages other than English (Spanish, Polish, etc.)

10-hour and 30-hour Programs
The 30-hour training program is intended to provide workers with some safety responsibility a greater depth and variety of training. All outreach training is intended to cover an overview of the hazards a worker may encounter on a job site. Training emphasizes hazard identification, avoidance, control and prevention, not OSHA standards.

TOSHA Silica in Construction
2017-10-25 08:00 - 12:00 UTC
This half day course will review the silica in construction standard, Table 1, written exposure control plan, competent person, housekeeping & medical exams.
To register for this seminar, fill out this form.

TOSHA Basic Safety
2017-10-19 08:00 - 16:00 UTC
This full day course will review the most cited safety standards in general industry, walking working surfaces, emergency procedures, personal protective equipment (PPE), machine guarding, lock out/tag out (LOTO), & electrical.
To register for this seminar, fill out this form.

TOSHA Silica in General Industry
2017-10-18 08:00 - 12:00 UTC
This half day course will review the silica in general industry standard, exposure assessments, methods of compliance, medical surveillance & training.
To register for this seminar, fill out this form.

URD School
2017-10-16 12:00 - 2017-10-20 11:30 UTC, 2015-10-12 08:00 - 2015-10-16 12:00 (America/Chicago)

TOSHA Maintenance Related Standards
2017-10-12 08:00 - 16:00 UTC
This full day course will review the most cited standards in maintenance, lock out/tag out (LOTO), machine guarding, electrical, confined spaces, housekeeping, egress routes, emergency procedures, fire safety, compressed gas safety & health hazards.
To register for this seminar, fill out this form.

TOSHA Walking, Working Surfaces
2017-10-11 08:00 - 12:00 UTC
This half day course will review the changes to subparts D & I of 29 CFR 1910.
To register for this course, fill out this form.

Regulator/Recloser School
2017-08-14 12:00 - 2017-08-18 11:30 UTC

Line Clearance Tree Trimming School
2017-08-02 12:00 - 2017-08-04 11:30 UTC

Electrical Transmission & Distribution Course
2017-07-19 08:30 - 2017-07-20 17:00 UTC
This OSHA-accredited course provides an overview of OSHA construction safety regulations, with an emphasis on OSHA regulations for electric generation, transmission, and distribution equipment and systems (1910.269 and 1926 Subpart V). The OSHA 10-hour course is intended for line workers and supervisory employees. Persons attending this course will receive training in the following topics: Introduction to OSHA; Electrical Safety; Safe Grounding Practices; Personal Protective Equipment; Job Briefings; Confined and Enclosed Spaces; Lifting and Rigging; Excavations; and Fall Protection for the Electrical Industry. Each module is tailored specially toward the power transmission and distribution industry. Although this course is based on the current OSHA 1910 and 1926 standards, the course material discusses standards and industry accepted best practices along with such non-traditional subjects as equal-potential grounding, flame resistant clothing, electrical arc protection, and pre-job briefings. Students completing the ET&D 10-Hour course receive a traditional OSHA 10-Hour for Construction card with the ET&D endorsement.

2017 Tennessee Valley Lineman Rodeo
2017-06-09 - 2017-06-10

Hotline School
2017-05-08 12:00 - 2017-05-12 12:00 UTC

Advanced Transformer School
2017-04-17 12:00 - 2017-04-21 12:00 UTC

Underground Distribution Roundup
2017-01-25 17:30 - 2017-01-26 16:00 UTC

Work Zone Traffic Control Class
2016-12-15 08:00 - 16:00 UTC

Flagging Class
2016-12-14 12:00 - 16:00 UTC

Accident Investigation Workshop
2016-10-13 09:00 - 15:00 UTC
The Tennessee JT&S Program in conjunction with Federated Rural Electric Insurance will be holding an Accident Investigation Workshop on the TCAT Murfreesboro Campus. The workshop will be held October 13 from 9:00 am until 3:00 pm. There will be no charge for this workshop, but seating is limited so please RSVP before September 30 if you plan to attend so we can prepare the materials. Federated REI will conduct the workshop and will address accident investigation including collection of evidence, conducting interviews, and preparing written reports.

Safety Coordinators Workshop
2016-10-12 09:00 - 15:00 UTC
The TN JT&S Program will be hosting a Safety Coordinators Workshop for its participants and other interested utilities on October 12, 2016. The Workshop will be held at the TCAT Murfreesboro campus from 9:00 a.m. until 3:00 p.m. The Workshop will cover several topics regarding OSHA compliance and regulation changes both recent and upcoming as well as discussion of accidents trends, causes, and prevention within the utility industry. The afternoon session will include group discussion on compliance practices and processes.

TOSHA Basic Safety
2016-10-04 08:30 - 15:30 UTC
This course emphasizes on the identification & control of the most cited safety standards in general industry – walking working surfaces, emergency procedures, personal protective equipment (PPE), machine guarding, lock out/ tag out (LOTO), & electrical.

Foreman’s/Supervisors Conference
2016-01-06 12:00 - 2016-01-08 12:00 UTC

December 7-9 NRECA Supervisory Skills Workshop
2015-12-07 12:00 - 2015-12-09 12:00 UTC

TOSHA Confined Space Workshop
2015-11-18 08:00 - 12:00, 2015-10-21 08:00 - 12:00, 2015-09-15 08:00 - 12:00 (America/Chicago)
